Existing Projects


Baker Triangle Prefab - Exterior Wall Panels

A 33 story hotel in downtown Austin, TX, this project presented many challenges. Due to its location, the site has a zero lot-line. Baker Triangle Prefab was also able to offer the first panelized use of Dri-Design's metal panel cladding.

The ICU at Medical Center of Arlington was the first in a series of vertical expansions to existing buildings. Adding on to an existing structure with a prefabricated product created many unique challenges. The use of 3D laser scanning technology was one key solution to this.

This was a load bearing panel which incorporated structural elements in the panel framing to carry the building's roof joists. Temporary bracing was installed to support the panel until the remainder of the structure was completed.

This project was a one story Hospital in the remote location of McCamey, TX which is about 70 miles south of Odessa. It required 194 load bearing panels, each with a different design. The panels were shipped with windows and doors pre-installed. The panel used was the StoPanel Classic ci.

The Spire Garage project was a one-story addition to an existing parking garage. Prefabricated metal-framed panels were used to replace precast concrete panels. The weight reduction per panel was significant and the project was installed in a matter of days. The panel used was the StoPanel Classic without insulation.

1400 Hi Line is a luxury high rise in the Dallas Design District. Baker Triangle prefabricated modified cementitious wall panels to serve as a barrier between the exterior patios.

Baker Triangle installed hurricane rated EIFS panels on this 28-story casino hotel. The hotel has over 1500 rooms. This building, which was completed in 2008, has withstood 3 hurricanes.

Dallas 24 Hour Club is a fantastic charitable organization that provides safe, sober transitional living for homeless men and women seeking a brand new life away from drugs and alcohol. When the organization was in need of a new facility in the heart of Dallas, Baker Triangle Prefab was part of a team of contractors to donate our services on the job to help the cause. The result was a beautiful full brick panel which installed together seamlessly.

This project presented the unique challenge of replacing an existing screenwall without the use of a tower crane to install panels. The hospital tower was built in 1972 and the existing screenwall was severely oil-canning. Baker Triangle Prefab presented the solution to install 4 prefabricated panels featuring a Dri-Design metal panel cladding with the use of a freight helicopter. The panels were installed in under 2 hours.

Milled Drywall Projects

Solarwinds - Austin, TX

Perot Museum of Nature & Science Cafe - Dallas, TX

Pryor Data Center - Pryor, OK

Frost Bank Corporate Headquarters - San Antonio, TX

Texas A&M University Center for Innovation in Advanced Development - College Station, TX

Hotel Granduca - Austin, TX


StoPanel Projects